R. Kuchekar, Shashikant M. Naval, Ramesh H. Han, Sung Selective determination of selenium(IV) from environmental samples by UV-visible spectrophotometry using <i>O</i>-methoxyphenyl thiourea as a chelating ligand <div><p>A selective extraction–spectrophotometric method has been developed for determination of selenium(IV) using <i>O</i>-methoxyphenyl thiourea (OMePT) as a chelating agent. The basis of the proposed method is the spectrophotometric determination of selenium(IV)–OMePT complex obtained after extraction of selenium(IV) from 3.5 M hydrochloric acid media using OMePT in chloroform solvent. The complex shows maximum absorbance at 350 nm against the reagent blank. The Beer’s law was obeyed over the concentration range 5–60 µg mL<sup>−1</sup> of selenium(IV). The optimum concentration range was 20–50 µg mL<sup>−1</sup> as evaluated from Ringbom’s plot. The molar absorptivity and Sandell’s sensitivity of the selenium(IV)–OMePT complex in chloroform were 3.312 × 10<sup>2</sup> L mol<sup>−1</sup>cm<sup>−1</sup> and 0.2384 µg cm<sup>−2</sup>, respectively. The composition of selenium(IV)–OMePT complex was 1:2 established from slope ratio method, mole ratio method and Job’s continuous variation method. The complex was stable for more than 72 h. The interfering effect of various foreign ions was studied and suitable masking agents were used wherever necessary to enhance the selectivity of the developed method. The proposed method was successfully applied for the determination of selenium(IV) from real samples, viz. pharmaceutical formulations, shampoo, vegetable sample, synthetic mixtures and environmental samples. Repetition of the method was checked by finding the relative standard deviation (RSD) for 10 determinations which was 0.35%.</p></div> mole ratio method;selenium;concentration range;10 determinations;chelating agent;Selective determination;molar absorptivity;slope ratio method;vegetable sample;chelating ligand;rsd;variation method 2015-06-25
    https://tandf.figshare.com/articles/journal_contribution/Selective_determination_of_selenium_IV_from_environmental_samples_by_UV_visible_spectrophotometry_using_i_O_i_methoxyphenyl_thiourea_as_a_chelating_ligand/1420459
10.6084/m9.figshare.1420459.v2