10.6084/m9.figshare.963285.v2 Kiumars Badr Kiumars Badr Mahmoud Bahmani Mahmoud Bahmani Abdolhossein Jahanmiri Abdolhossein Jahanmiri Dariush Mowla Dariush Mowla Biological removal of methanethiol from gas and water streams by using <i>Thiobacillus thioparus</i>: investigation of biodegradability and optimization of sulphur production Taylor & Francis Group 2014 methanethiol streams biodegradability optimization sulphur 2014-04-22 07:33:33 Journal contribution https://tandf.figshare.com/articles/journal_contribution/Biological_removal_of_methanethiol_from_gas_and_water_streams_by_using_i_Thiobacillus_thioparus_i_investigation_of_biodegradability_and_optimization_of_sulphur_production/963285 <div><p>The present work mainly deals with biological oxidation, which was tested using the bacterium <i>Thiobacillus thioparus</i> in semi-batch bioreactor systems to evaluate the removal efficiencies and optimal conditions for the biodegradation of methanethiol (MT) in order to treat the natural gas and refinery output streams. The efficiency of this method is analysed by evaluating the concentration of MT in a bioreactor. The effect of operational parameters, such as initial concentration of MT, pH, temperature, dissolved oxygen (DO), initial concentration of bacteria and reaction time on the degradation of MT, were studied. In this process, MT is converted into elemental sulphur particles as an intermediate in the oxidation process of MT to sulphate. The obtained results showed that the highest degradation rate occurred during the first 300 minutes of reaction time. The optimal conditions of the different initial MT concentrations with 0.3–0.6 bacteria OD, DO of 0.5 ppm, acidic pH value of 6.2 and temperature of 30°C are obtained. Acidic pH and oxygen-limiting conditions were applied to obtain 80–85% selectivity for elemental sulphur formation in products. Under the optimal conditions, and for the highest (8.51 mM) and the lowest (0.53 mM) concentration of MT, the biological removal was about 89% and 94%, respectively.</p></div>