Taylor & Francis Group
Browse
lsst_a_1634731_sm1758.docx (191.61 kB)

Adsorptive removal of alizarin dye from wastewater using maghemite nanoadsorbents

Download (191.61 kB)
journal contribution
posted on 2019-07-01, 05:10 authored by Ismail Badran, Rawan Khalaf

This is an investigation of the adsorptive removal of anthraquinone dyes, resembled by Alizarin, by utilizing maghemite iron oxide (γ-Fe2O3) nanoparticles in aqueous media. The adsorption process was affected by several parameters such as solution pH, adsorbent amount, contact time, and temperature. After optimizing the parameters affecting the adsorption, the process was successful in removing Alizarin dye with an efficiency exceeding 95%. Best adsorption results were achieved at a pH of 11 and contact time of 60 min. The adsorption was shown to follow the Langmuir model suggesting a monolayer and homogeneous coverage. The maximum adsorption capacity (qm) was found to be 23.2 mg/g at pH = 11. A thermodynamic study showed that the adsorption process is exothermic and spontaneous at room temperature. The Gibbs free energy of adsorption (-6.79 kJ/mol) obtained in this study suggests a physisorption process. This finding has facilitated the regeneration of the Fe2O3 nanocatalyst. Both NaOH and HNO3 at dilute levels were tested for the regeneration of the nanocatalyst. Regeneration with HNO3 was successful up to four successive removal cycles with an efficiency >80%. Photodegradation experiments utilizing a UV light were also successful in maximizing the adsorption removal efficiency. A sorption mechanism based on the results obtained in this work is also proposed.

Funding

This work was supported by the MEDRC.

History