Investigation of dissolution rate kinetics of bulk pharmaceutical feed streams within a stirred tank vessel and a twin screw extruder

The introduction of continuous manufacturing of pharmaceuticals has highlighted the challenging area of continuous dissolution of solids for work ups to flow chemistry systems. In this study, the use of a 16 mm twin screw extruder (TSE) as a platform technology for solid feeds is investigated using four solid pharmaceutical ingredients (PI) in a mixture of water and IPA. In order for comparison, the same experiments were also carried out in a batch traditional stirred tank vessel (STV). The objectives of this work are to gain further scientific understanding on dissolution kinetics and to compare kinetics in both a batch and continuous system. The concentration of each PI during dissolution is monitored using an in-line UV-ATR probe, allowing the extraction of dissolution kinetics. Faster dissolution rates are achieved in the TSE than in the STV due to higher power dissipation generated by the aggressive shear mixing and thermal energy within the TSE. Complete dissolution of paracetamol is obtained within the residence time of the TSE; complete dissolution of benzoic acid and acetylsalicylic acid are achieved at higher barrel temperatures; however full dissolution of nicotinic acid is not achievable in the TSE under the experimental conditions.